How to check if the RAM and ROM used by the program exceed the supported chip size when using Keil development environment?
N
NuForum Admin
The Keil development environment supports the function of confirming the RAM and ROM size used by program during compilation. If the RAM and ROM used by the program exceed the chip size, Keil will automatically display warning message.
NUC240VE3AN is used as example below to illustrate how to check RAM and ROM:
- Invoke Target Options.
- In the Linker tab, enable “Use Memory Layout from Target Dialog”, and remove --first='startup_NUC230_240.o(RESET)' in the Misc Controls field.
In the Device tab, select NuMicro Cortex-M Database under the Database pull-down menu, and then select a specific part number.
In the Target tab, enable IROM and IRAM1 as default, and then select Startup as IROM1.
After completing the steps above, when the RAM and ROM used by the program exceed the supported chip size, Keil will automatically display warning message.
| Products: | Microcontrollers ,Arm Cortex-M0 MCUs ,M051 Base Series ,M0518 Series ,M0519 Series ,Mini51 Base Series ,Nano100/102 Base Series ,Nano110/112 LCD Series ,Nano120 USB Series ,Nano130 Advanced Series ,NUC029 Series ,NUC100/200 Advanced Series ,NUC120/122/123/220 USB Series ,NUC130/230 CAN Series ,NUC131/NUC1311 CAN Series ,NUC140/240 Connectivity Series ,Arm Cortex-M4 MCUs ,M451 Base Series ,M451M Series ,M452 USB Series ,M453 CAN Series ,NUC442/472 Series ,NUC505 Series |
|---|---|
| Applications: | |
| Function: | Software and Tools,Development-Environment,Keil |