What is the power source supplied to VDD12 in the NUC505 series?

Post Reply
Dylan Hsieh
Posts: 31
Joined: 22 Mar 2017, 09:54

29 Mar 2017, 09:31

VDD12 in the NUC505 can be powered from an external LDO or internal LDO.
External LDO
VDD12 in the NUC505 is connected to an external 1.2V, and LDO_CAP connects a 4.7uF capacitor to ground
Image

Internal LDO
LDO_CAP in the NUC505 is first connected to the 4.7uF capacitor, and then connected to VDD12.
Image

Note:
  • LDO_CAP: LDO output pin, DC 1.2V.
  • VDD12: I/O power supply pin, DC 1.2V.
The NUC505 power distribution diagram is shown below. LDO_CAP needs to be connected to the 4.7uF capacitor first and then ground; if VDD12 needs to be powered internally, LDO_CAP is connected to the 4.7uF capacitor first, and then connected to VDD12.
Image

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 0 guests