- Application: This example is an application code for CAN bus, which describes how to recover and let a device re-enter the bus for packet transmission and reception when a bus off occurs at the device node.
- BSP Version: M480 Series BSP CMSIS V3.05.003
- Hardware: NuMaker-PFM-M487 V3.0
This example provides a handler when the device goes to bus off. When the MCU detects that the node has entered the bus-off state, it will not immediately resume the node's communication. Wait until the status that caused the error is eliminated before proceeding with the bus-off recovery procedure.
You can download the sample code at https://www.nuvoton.com/resource-downlo ... 2209475059