NAND cannot boot without SPI-NAND
Answer.
The boot failure issue after removing SPI-NAND has been resolved by disabling it in the device tree. By adding the following code to MA35D1_Buildroot\output\build\uboot-custom\arch\arm\dts\ma35d1.dts, SPI-NAND is disabled.
Code: Select all
&qspi0 {
spi-nand@0 {
compatible = "spi-nand-disabled";
};
};
#MA35D1, #SOM_EVB, #NAND #BOOT
.