FAQ_MA35D1_Touchpad Cannot Touch on NuMaker-HMI-MA35D1
Posted: 18 Jan 2023, 14:55
Question :
FAQ_MA35D1_Touchpad Cannot Touch on NuMaker-HMI-MA35D1 EVB Board
Answer.
The touch panel needs to be calibrated for the first time:
Run the commands as follows:
And click the four corners and the center point to complete the calibration, calibration points will be stored.
#MA35D1 # Touchpad #touch # NuMaker-HMI-MA35D1
.
FAQ_MA35D1_Touchpad Cannot Touch on NuMaker-HMI-MA35D1 EVB Board
Answer.
The touch panel needs to be calibrated for the first time:
Run the commands as follows:
Code: Select all
$ ts_calibrate- touch calibration points
- pic.PNG (43.47 KiB) Viewed 15460 times
#MA35D1 # Touchpad #touch # NuMaker-HMI-MA35D1
.