FAQ_MA35D1_Touchpad Cannot Touch on NuMaker-HMI-MA35D1

[yhcheng3]

Question :

FAQ_MA35D1_Touchpad Cannot Touch on NuMaker-HMI-MA35D1 EVB Board


Answer.

The touch panel needs to be calibrated for the first time:

Run the commands as follows:

Code: Select all

$ ts_calibrate

And click the four corners and the center point to complete the calibration, calibration points will be stored.

touch calibration points

pic.PNG (43.47 KiB) Viewed 14284 times

#MA35D1 # Touchpad #touch # NuMaker-HMI-MA35D1
.