FAQ_MA35D1_NuWriter Mass Production Mode
Posted: 13 Dec 2022, 18:44
1. Tick “Mass production mode” option
2. Insert the Micro USB from PC to HSUSB0
3. Check power-on setting is boot from USB
4. Attach the right DDR
5. If you successfully attach the DDR file, the log will show in the window.
NuWriter can connect up to 8 devices.
6. The picture below shows successfully programming the package
2. Insert the Micro USB from PC to HSUSB0
3. Check power-on setting is boot from USB
4. Attach the right DDR
- FAQ_MA35D1_NuWriter Mass Production Mode1.png (21.25 KiB) Viewed 8224 times
NuWriter can connect up to 8 devices.
6. The picture below shows successfully programming the package
- FAQ_MA35D1_NuWriter Mass Production Mode1.png (21.25 KiB) Viewed 8224 times