Turn On the Power, the Power Light is On, but the HMI has No Screen on the NuMaker-HMI-MA35D1 Evaluation Board
Answer.
The NuMaker-HMI-MA35D1 evaluation board needs to press RTC Wakeup button to start up.
Press RTC Wakeup Button (SW1) to enable the discrete power converters
- RTC Wakeup Button and RESET Button
- figure2.png (795.59 KiB) Viewed 3244 times
#MA35D1 #NuMaker-HMI-MA35D1 #no_screen #RTC #wakeup #reset
.