After finishing device tree setting, use echo command write values to /sys/class/leds/LED0/brightness control LED brightness
Code: Select all
echo 1 > /sys/class/leds/LED0/brightness
echo 0 > /sys/class/leds/LED0/brightnessFAQ_MA35D1_Control LED on the Evaluation Board
Refer to UM_EN_MA35D1_Linux_BSP.pdf
After finishing device tree setting, use echo command write values to /sys/class/leds/LED0/brightness control LED brightness
#LED #MA35D1
After finishing device tree setting, use echo command write values to /sys/class/leds/LED0/brightness control LED brightness
-
- Information
-
Who is online
Users browsing this forum: No registered users and 8 guests