FAQ_MA35D1_NuWriter Issue

[ytliu6]

1. Check the HSUSB0 is connecting to PC

2. Check the driver is installed or not

FAQ_MA35D1_NuWriter Issue.png (18.49 KiB) Viewed 3526 times

https://github.com/OpenNuvoton/MA35D1_N ... ter/driver

3. Check the DDR initial code is match the DDR type and size on target board

4. Check the USB controller in virtual machine

The USB needs to be control by host OS(Windows)
If you have removed USB control from virtual machine and NuWriter still can’t connect to the target board, close the virtual machine and try initial again

#MA35D1 #NuWriter