[Nu-Link2] Enabling Debug Functionality on NuMaker Boards in Mbed Studio
Posted: 15 Mar 2024, 11:06
[For further inquiries, please e-mail to shchen2@nuvoton.com]
[Visit https://www.nuvoton.com/iot_startup for more IoT solutions]
Despite using Mbed Studio, the debug functionality is not available on NuMaker boards. Please refer to this article for updating the necessary files.
https://github.com/morgan-du/DFP-Update
To quickly download from GitHub, click the green "Code" button, then select "Download ZIP".
Note that only NuMaker boards equipped with Nu-Link2-ME support this feature, such as the NuMaker-IoT-M467 and NuMaker-IoT-M263A development boards.
[Visit https://www.nuvoton.com/iot_startup for more IoT solutions]
Despite using Mbed Studio, the debug functionality is not available on NuMaker boards. Please refer to this article for updating the necessary files.
https://github.com/morgan-du/DFP-Update
To quickly download from GitHub, click the green "Code" button, then select "Download ZIP".
- 2024-03-15_110311.png (22.81 KiB) Viewed 7472 times
Note that only NuMaker boards equipped with Nu-Link2-ME support this feature, such as the NuMaker-IoT-M467 and NuMaker-IoT-M263A development boards.