Hi
I am facing issue with touch screen calibration
I can't able to see any window during touch screen calibration but only updates in RS232
So i am using a stencil created by me on own is used for touch screen calibration
Actually it worked before but now not working
Don't know why this happens
But my touch & display are working independently which i have tested separately
Please share your suggestions
Thanks
R Sridhar
tslib touch screen calibration not working
-
- Posts: 96
- Joined: 28 Jan 2019, 13:49
I suggest you to download the latest N9H series Non-OS BSP and try again~
https://github.com/OpenNuvoton/N9H30_emWin_NonOS
https://github.com/OpenNuvoton/N9H20_emWin_NonOS
https://github.com/OpenNuvoton/N9H26_emWin_NonOS
https://github.com/OpenNuvoton/N9H30_emWin_NonOS
https://github.com/OpenNuvoton/N9H20_emWin_NonOS
https://github.com/OpenNuvoton/N9H26_emWin_NonOS
-
- Information
-
Who is online
Users browsing this forum: No registered users and 1 guest