Hi
I am using n9h30f61iec processor for my project
I don't know how to use your emwin vnc example code
so please send demo video with needed code attachments
Thanks
R Sridhar
emwin vnc
-
- Posts: 94
- Joined: 28 Jan 2019, 13:49
Please make sure you have Linux environment first.
Linux environment in N9H30 path: https://github.com/OpenNuvoton/ARM7-ARM9-Family
Download 4. N9H30 --> VMWare Linux develop environment
If you can run emWin under Linux, please add the attached file "GUI_VNC_X_StartServerLinux.c" into Application folder, e. g., SimpleDemo\Application
Then in main.c add
extern int GUI_VNC_X_StartServer(int LayerIndex, int ServerIndex);
GUI_VNC_X_StartServer(0, 0);
After GUI_Init();
make clean
make
./SimpleDemo
Linux environment in N9H30 path: https://github.com/OpenNuvoton/ARM7-ARM9-Family
Download 4. N9H30 --> VMWare Linux develop environment
If you can run emWin under Linux, please add the attached file "GUI_VNC_X_StartServerLinux.c" into Application folder, e. g., SimpleDemo\Application
Then in main.c add
extern int GUI_VNC_X_StartServer(int LayerIndex, int ServerIndex);
GUI_VNC_X_StartServer(0, 0);
After GUI_Init();
make clean
make
./SimpleDemo
- Attachments
-
- GUI_VNC_X_StartServerLinux.zip
- VNC
- (2.65 KiB) Downloaded 2276 times
-
- Posts: 94
- Joined: 28 Jan 2019, 13:49
If you're using FreeRTOS & lwIP, you have to familiar with the knowledge of operation & configuration of FreeRTOS & lwIP.
Nuvoton ONLY ported hardware layer in FreeRTOS and lwIP (N9H30 ONLY because of it has built-in Ethernet interface), you can find in:
N9H30 FreeRTOS: https://github.com/OpenNuvoton/N9H30_em ... e/FreeRTOS
N9H30 lwIP: https://github.com/OpenNuvoton/N9H30_em ... LwIP_httpd
N9H20: https://github.com/OpenNuvoton/N9H20_em ... e/FreeRTOS
N9H26: https://github.com/OpenNuvoton/N9H26_em ... e/FreeRTOS
Please note that SEGGER's emWin VNC official source GUI_VNC_X_StartServerLinux.c is for Linux.
Nuvoton ONLY ported hardware layer in FreeRTOS and lwIP (N9H30 ONLY because of it has built-in Ethernet interface), you can find in:
N9H30 FreeRTOS: https://github.com/OpenNuvoton/N9H30_em ... e/FreeRTOS
N9H30 lwIP: https://github.com/OpenNuvoton/N9H30_em ... LwIP_httpd
N9H20: https://github.com/OpenNuvoton/N9H20_em ... e/FreeRTOS
N9H26: https://github.com/OpenNuvoton/N9H26_em ... e/FreeRTOS
Please note that SEGGER's emWin VNC official source GUI_VNC_X_StartServerLinux.c is for Linux.
-
- Information
-
Who is online
Users browsing this forum: No registered users and 1 guest