Note: need to increase emWin memory pool in GUIConf.c, e. g., 1-MByte is a good start.
Note: emWin didn't support dynamic orientation!
Note: need to proceed touch calibration again, emWin didn't support touch orientation https://forum.segger.com/index.php/Thre ... RotateHQT/
Find LCDConf.c and add GUI_SetOrientation with user defined DISPLAY_ORIENTATION:
Code: Select all
//
// Orientation
//
//#define DISPLAY_ORIENTATION (0)
//#define DISPLAY_ORIENTATION (GUI_MIRROR_X)
//#define DISPLAY_ORIENTATION (GUI_MIRROR_Y)
//#define DISPLAY_ORIENTATION (GUI_MIRROR_X | GUI_MIRROR_Y)
//#define DISPLAY_ORIENTATION (GUI_SWAP_XY)
//#define DISPLAY_ORIENTATION (GUI_MIRROR_X | GUI_SWAP_XY)
//#define DISPLAY_ORIENTATION (GUI_MIRROR_Y | GUI_SWAP_XY)
//#define DISPLAY_ORIENTATION (GUI_MIRROR_X | GUI_MIRROR_Y | GUI_SWAP_XY)
.
.
.
LCD_SetVRAMAddrEx(0, (void *)u8FrameBufPtr);
GUI_SetOrientation(DISPLAY_ORIENTATION);