In the NuMicro® family, if the Data Flash size is configurable, its size is shared with the APROM. To configure Data Flash, please follow the steps below:
In Keil µVision4/5, open the Option for target form (Flash->Configure Flash Tools)
1. Select “Utilities”
2. Click “Settings” button
3. Click “Configure” button
4. Enable “Data Flash”;
5. Set the Data Flash size;
6. Perform programming.
How to enable configurable Data Flash and set the size in the Keil rvmdk development environment?
-
- Information
-
Who is online
Users browsing this forum: No registered users and 18 guests