How to enable configurable Data Flash and set the size in the IAR Embedded Workbench for ARM development environment?

[a_ziliu]

In the NuMicro® family, if the Data Flash size is configurable, its size is shared with the APROM. To configure Data Flash, please follow the steps below:

1. Select Nu-Link ICP Programming Tool;
2. Select Target Chip for the ICP Tool;
3. Click “Continue” button;

4. Click “Setting” button to open the Chip Options form;
5. Enable “Data Flash”;
6. Set the Data Flash size;
7. Enable “Config” for programming according to the config values.