What is the Continuous Counting Operation mode for Timer controller?
Posted: 24 Mar 2017, 15:06
The Continuous Counting Operation mode means that the Timer will continuously count from zero to 2^24-1 and restart to zero again.
Each time the Timer interrupt event flag (TIF) is set by the hardware and the interrupt signal is generated when the value of 24-bit up-counting Timer counter matches the setting of TCMPR (Timer Compare Register).
Each time the Timer interrupt event flag (TIF) is set by the hardware and the interrupt signal is generated when the value of 24-bit up-counting Timer counter matches the setting of TCMPR (Timer Compare Register).
- Continuous Counting Operation mode.png (13.34 KiB) Viewed 2904 times