What should be considered when using the PWM function of pin P4.3 in the M051 and NUC029xAN series?
Posted: 27 Mar 2017, 14:08
When using the PWM function of the M051 and NUC029xAN series, the user needs to pay attention to the setting of the pin P4.3, as described below:
When setting the pin P4.3 or PWM capture function, the pin P4.1 should be set to PWM1 or reserved.
When setting the pin P4.3 or PWM capture function, the pin P4.1 should be set to PWM1 or reserved.