Page 1 of 1

LCD module on NUC140 learning board is ripped

Posted: 16 Jun 2017, 17:35
by Prima
Hi Pak Prima,

1 LCD board module there is one that ripped, Does Digiware sell its replacement?
thanks.



Regards,

Christiand

Re: LCD module on NUC140 learning board is ripped

Posted: 16 Jun 2017, 17:36
by Prima
Hi Mr. Christiand,

We apologize for any inconvenience, regarding the damage to the LCD cable.
I'm discussing internally.
Hopefully there is a good solution.
thanks.

Regards,
Prima

Re: LCD module on NUC140 learning board is ripped

Posted: 16 Jun 2017, 17:43
by Prima
Hi Pak Prima

Well, it's okay
For LCD wire, Digiware still not sell it.
We try to help find solutions to Mr. Christiand about LCD wire.
thank you

Best regards,
Umar
Digiware

LCD module on NUC140 learning board is ripped

Posted: 21 Aug 2019, 17:06
by Remontvfdspb
Привет всем
Попался мне в руки девайс китайской промышленности под названием "Board Module Port IIC/I2C/TWI/SP I Serial Interface For Arduino 1602 LCD" рисунок во вложении.
Достоинство сей конструкции - зкономия линий ввода/вывода МК. Появилось желание попробовать это "чудо". Итог - библиотека для работы с этим модулем.
Делалось "побыстрому", на пробу...
Так как тема ЖКИ на контроллере HD44780, AIP31066 , KS0066 , SPLC780 , ST7066 уже "замозолила глаза" много писать не буду. Функции библиотеки "стандартны".
Улучшил. Добавил ввод символов пользователя и простую смену адреса модуля.

LCD module on NUC140 learning board is ripped

Posted: 09 Dec 2019, 23:07
by PambMadia
Hi.
How to read errors from the display on industrial equipment (for example, frequency converters), you can look at the information on this site, in Russian - https://prom-electric.ru/remont-chastot ... eterburge/