Hi Prima,
Could you please advise if there is any material / video / reference material for the CMSIS - RTX RTOS using Keil MicroVision5 to be used on the NUC140 Learning Board ?
As there does not seem to be any material of that sort any where …
Hope to hear from you soon.
Thanks.
Regards,
Ober Choo
Cytron Technologies
URL: www.cytron.com.my
Keil RTX RTOS Query on Nuvoton M0
Hi Ober,
http://bbs.21ic.com/search.php?mod=foru ... yes&kw=rtx
Those are some discussions on RTX.
Thanks and best regards,
Henry
http://bbs.21ic.com/search.php?mod=foru ... yes&kw=rtx
Those are some discussions on RTX.
Thanks and best regards,
Henry
Hi Prima,
The discussion is deleted. Can help?
Thanks.
Regards,
Ober Choo
Cytron Technologies
URL: www.cytron.com.my
The discussion is deleted. Can help?
Thanks.
Regards,
Ober Choo
Cytron Technologies
URL: www.cytron.com.my
Hi Ober,
You can go to http://bbs.21ic.com/iclist-187-1.html and change drop down menu to “本版” and type “RTX” into blue rectangle.
Then start to search.
Thanks and best regards,
Henry
You can go to http://bbs.21ic.com/iclist-187-1.html and change drop down menu to “本版” and type “RTX” into blue rectangle.
Then start to search.
Thanks and best regards,
Henry
- Attachments
-
- bbs.21ic.com RTX RTOS.jpg (12.94 KiB) Viewed 79451 times
-
- Posts: 3
- Joined: 20 Jun 2017, 13:55
Hi Prima,
Could you please advise on availability of steps to be done to implement the RTX RTOS using Keil uV5 ? Done it on an mBed board that worked easily. Am looking for steps to get it done easily on the NUC140 Learning board
The previously mentioned link did not have steps or sufficient information to get that done.
Could you please advise on availability of steps to be done to implement the RTX RTOS using Keil uV5 ? Done it on an mBed board that worked easily. Am looking for steps to get it done easily on the NUC140 Learning board
The previously mentioned link did not have steps or sufficient information to get that done.
-
- Posts: 3
- Joined: 20 Jun 2017, 13:55
Hi Prima,
Thanks for the link. Have tried it .. Seem to be having a error that appears once i have compiled and built it.. Which is as follows (Am i missing something) :
*** Using Compiler 'V5.06 update 1 (build 61)', folder: 'C:\Keil_v5\ARM\ARMCC\Bin'
Rebuild target 'Target 1'
compiling retarget.c...
C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Include\NUC100Series.h(12804): error: #5: cannot open source input file "SYS.h": No such file or directory
#include "SYS.h"
C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Driver\retarget.c: 0 warnings, 1 error
compiling main.c...
assembling startup_NUC100Series.s...
compiling system_NUC100Series.c...
C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Include\NUC100Series.h(12804): error: #5: cannot open source input file "SYS.h": No such file or directory
#include "SYS.h"
RTE\Device\NUC140VE3CN\system_NUC100Series.c: 0 warnings, 1 error
compiling RTX_Conf_CM.c...
".\Objects\RTX_Samp1.axf" - 2 Error(s), 0 Warning(s).
Target not created.
Build Time Elapsed: 00:00:15
Is the SYS.h file located somewhere else ? Please advise.
Thanks
Thanks for the link. Have tried it .. Seem to be having a error that appears once i have compiled and built it.. Which is as follows (Am i missing something) :
*** Using Compiler 'V5.06 update 1 (build 61)', folder: 'C:\Keil_v5\ARM\ARMCC\Bin'
Rebuild target 'Target 1'
compiling retarget.c...
C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Include\NUC100Series.h(12804): error: #5: cannot open source input file "SYS.h": No such file or directory
#include "SYS.h"
C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Driver\retarget.c: 0 warnings, 1 error
compiling main.c...
assembling startup_NUC100Series.s...
compiling system_NUC100Series.c...
C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Include\NUC100Series.h(12804): error: #5: cannot open source input file "SYS.h": No such file or directory
#include "SYS.h"
RTE\Device\NUC140VE3CN\system_NUC100Series.c: 0 warnings, 1 error
compiling RTX_Conf_CM.c...
".\Objects\RTX_Samp1.axf" - 2 Error(s), 0 Warning(s).
Target not created.
Build Time Elapsed: 00:00:15
Is the SYS.h file located somewhere else ? Please advise.
Thanks
Dear Patrick,
Compiler can not find SYS.h file which is announced to locate at “C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Include\NUC100Series.h”
You should check the folder if the file is exist or not.
Thanks and best regards,
Henry/林昌宏.
Compiler can not find SYS.h file which is announced to locate at “C:\Keil_v5\ARM\PACK\Nuvoton\NuMicro_DFP\1.0.9\Device\NUC100\Include\NUC100Series.h”
You should check the folder if the file is exist or not.
Thanks and best regards,
Henry/林昌宏.
-
- Posts: 3
- Joined: 20 Jun 2017, 13:55
Hi everyone,
Just found the location of the folder of the drivers that the Nuc100Series.h file was looking for ...
Had to include the directory into the compilation option of include path ...
Just found the location of the folder of the drivers that the Nuc100Series.h file was looking for ...
Had to include the directory into the compilation option of include path ...
-
- Information
-
Who is online
Users browsing this forum: No registered users and 1 guest