Page 1 of 1

[M480] Camera Interface Simulation by GPIO

Posted: 17 Jun 2020, 15:52
by chhsieh3
  • Application: This code uses M480 GPIO to capture CMOS sensor image data.
  • BSP Version: M480 Series BSP CMSIS V3.03.000
  • Hardware: NuMaker-IoT-M487 v1.2
This example code uses GPIO to simulate camera interface (CCIR601, 8/4 bit) and capture image by a Himax CMOS sensor.

User can use SW2 button on EVB to save a BMP file into SD card.

You can download the sample code at ... 0401151541