[M480] Camera Interface Simulation by GPIO

[chhsieh3]

• Application: This code uses M480 GPIO to capture CMOS sensor image data.
• BSP Version: M480 Series BSP CMSIS V3.03.000
• Hardware: NuMaker-IoT-M487 v1.2

This example code uses GPIO to simulate camera interface (CCIR601, 8/4 bit) and capture image by a Himax CMOS sensor.

User can use SW2 button on EVB to save a BMP file into SD card.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0401151541