- Application: This sample code uses EADC to capture the sine wave produced by the DAC.
- BSP Version: M480 Series BSP CMSIS V3.04.000
- Hardware: NuMaker-PFM-M487 Ver 3.0
In the example code, the software triggers the DAC to output a sine wave, and after the DAC output is stable, the software triggers the EADC to read its value. The sine wave consists of 64 levels. The pin used by the DAC is PB.13, and the pin used by the EADC is PB.0. The user must connect the two pins.
You can download the sample code at
https://www.nuvoton.com/resource-downlo ... 0626172618