NuForum

• Application: PWMA channel 0 trigger PWMA channel 2 when PWMA channel 0 outputs high.
• BSP Version: NUC230/240 Series BSP v3.01.002
• Hardware: NUC240VE3AN NuEdu Board V1.0

This sample code is using PWMA channel 0 to trigger PWMA channel 2. When PWMA channel 0 outputs high level voltage, then PWMA channel 2 can be enabled and output waveform. When PWMA channel 0 outputs low level voltage, then PWMA channel 2 can be disabled and output low.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1217171609