[NUC200] PN512 Card Reader

[chhsieh3]

• Application: The example code is to control card reader PN512 by NUC200 through I2C interface.
• BSP Version: NUC200 Series BSP CMSIS v3.00.004
• Hardware: NuTiny-EVB-NUC200-LQFP100 V1.0

This example code uses the SPI 0 of NUC200 to initialize the card reader PN512.Initialize and read the card information through the frame work of NXP NFC module and prints the card information through the serial port0 to PC.

The example can detect and display card type and UID information.

The card reader supports ISO/IEC 14443B and ISO/IEC 14443B.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0107164116