NuForum

• Application: This example code controls three-axis accelerometer LIS3DH through NUC123 I2C.
• BSP Version: NUC123Series BSP CMSIS v3.01.001
• Hardware: NuTiny-EVB-123-LQFP64

NUC123 controls LIS3DH three-axis accelerometer by I2C interface. The accelerometer values in three directions can be obtained by reading the registers through I2C. These values can be used for some interesting applications. Such as recording moving trajectories.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1223175318