[M258] Completing COM/SEG LCD Project with NuTool-LCDView

[chhsieh3]

• Application: This example code uses NuMaker-M258KG as an example to show how to complete a COM/SEG LCD project using NuTool-LCDView.
• BSP Version: M251_M252_M254_M256_M258_Series_BSP_CMSIS_V3.02.003
• Hardware: NuMaker-M258KG V1.1

NuTool-LCDView is a powerful tool that can generate LCD configuration code and obtain real-time emulator COM/SEG status, and help engineers complete and debug LCD projects easier.

The NuTool-LCDView has two functional modes, create mode and emulator mode. Users need to set LCD panel, COM/SEG table and generate header file under the create mode. After building and loading code into MCU, users can see the effect on PC after switching to emulator mode. Furthermore, the NuTool-LCDView supports not only stand-alone version, but plug-in Keil IDE and plug-in IAR IDE. Users can execute single-step debug while seeing text on LCD in the same time in Keil or IAR IDE.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1903103217