- Application: This sample code uses M480 series microcontroller (MCU) to output 6 PWM waveforms for 6 batteries’ discharge distribution.
- BSP Version: M480 BSP CMSIS V3.05.001
- Hardware: NuMaker-M483KG Ver1.1
Using multiple batteries in parallel will increase the current supply capacity. Due to the difference of battery voltage, the batteries cannot be directly connected in parallel. If the load current is 6 A and the power supply time of each battery is 1 ms within 6 ms, the average current of one battery is only 1 A in a long term. Therefore, it is necessary to generate a set of pulses for switching on the battery distribution.
You can download the sample code at
https://www.nuvoton.com/resource-downlo ... 1224140503