[NUC131] Transferring CAN Message Periodically

[chhsieh3]

• Application: This sample code uses NUC131SD2AEU to transfer CAN messages periodically and debug CAN interface.
• BSP Version: NUC131 BSP CMSIS V3.00.005
• Hardware: NuMaker-NUC131U V1.0

When configuring four messages, two messages of them will be updated every 2 seconds and the other two messages will not be updated. Only one of the four messages will be transferred actively every 2 seconds and the other three messages always wait for a remote frame.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 1124135846