Page 1 of 1

[M031] Control AS7221 by AT Command

Posted: 27 Aug 2021, 10:02
by chhsieh3
  • Application: This example code uses AT command to communicate with the AS7221 module through the USCI_UART interface.
  • BSP Version: M031 BSP CMSIS V3.03.000
  • Hardware: NuMaker-M031KI V1.0, AS7221 Module
In this example code, the M031 can send AT command by the UART interface to communicate with the AS7221 embedded module to control the lamp behavior, including brightness adjustment, color temperature control, gradient time tuning and so on.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0819185615