Page 1 of 1

[NDA102] Control AS7221 by DALI Command

Posted: 27 Aug 2021, 09:47
by chhsieh3
  • Application: This example code is to add UART interface to the original DALI application project for communication with AS7221, so that DALI
    Command can control the AS7221 module.
  • BSP Version: 102_207_209_NDA102_200707_Lib
  • Hardware: DALI_SLAVE_NDA102EC1 V1.0
This example code can receive the instructions sent by the DALI (Digital Addressable Lighting Interface) host, and then send commands to AS7221 through the UART1 interface to control the lamp behavior in the module, such as adjusting brightness, color temperature, gradient time and so on.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0803135654