[NUC240] Use ACMP to Reverse UART Tx Signal

Post Reply
chhsieh3
Posts: 209
Joined: 13 Mar 2020, 09:08

30 Jun 2020, 13:56

  • Application: This code uses ACMP as an inverter to reverse UART Tx signal.
  • BSP Version: NUC230/240 Series BSP CMSIS V3.01.001
  • Hardware: NuTiny-EVB-NUC240 V1.2
The ACMP inside MCU is used as an inverter. The ACMP positive input is UART Tx signal and the negative input is internal band-gap reference voltage. The output of ACMP is set to reverse signal.

You can download the sample code at https://www.nuvoton.com/resource-downlo ... 0617160718
Nuvoton

Post Reply
  • Information
  • Who is online

    Users browsing this forum: No registered users and 1 guest