Questions about NuBrick
Posted: 16 Jun 2017, 16:26
Good Morning Mr Prima.
We need help on using Nu Brick. End of 2016 we bought 6 pcs NuBricks. We buy because it is interested in IOT features and openness of architecture.
Since the arrival of the kit in Jogja, we have been using the kit via smartphone. When we wanted to reprogram the kit as needed, we encountered some difficulties. Details attached. We ask for help as soon as possible because we've tried various ways and follow the instructions on the web nuvoton but still fail.
That is our question. Awaiting for replies from Nuvoton ASAP. We thank you for your kind attention.
Programming using Keil
We have downloaded all necessary files and drivers. We tried to recompile the main.c file (as directed on the web and our assumptions) are the main files of the NuBrick board. Every time we compile, there is always a failure with the caption: The code size of this image (56220 bytes) exceeds the maximum allowed for this version of the linker. We've tried to modify Keil and look for other information but the results are always the same.
Please help with information how we can program the board according to our own needs? What has yet downloaded so that the compilation process always fails? Are there any other free editors / programmers we can use?
An example of a failed compilation result is shown in Figure 1.
Programming with Arduino IDE
According to the instructions in the manual, Nu Brick can be programmed using Arduino IDE. We are having trouble choosing the appropriate "board" type. We have downloaded all the drivers available online, but no board has yet matching Nu Brick.
Is there a special driver that can be sent to us so we can program Nu Brick using Arduino IDE as mentioned in manuals?
Nandra
Electrical Engineering UII
We need help on using Nu Brick. End of 2016 we bought 6 pcs NuBricks. We buy because it is interested in IOT features and openness of architecture.
Since the arrival of the kit in Jogja, we have been using the kit via smartphone. When we wanted to reprogram the kit as needed, we encountered some difficulties. Details attached. We ask for help as soon as possible because we've tried various ways and follow the instructions on the web nuvoton but still fail.
That is our question. Awaiting for replies from Nuvoton ASAP. We thank you for your kind attention.
Programming using Keil
We have downloaded all necessary files and drivers. We tried to recompile the main.c file (as directed on the web and our assumptions) are the main files of the NuBrick board. Every time we compile, there is always a failure with the caption: The code size of this image (56220 bytes) exceeds the maximum allowed for this version of the linker. We've tried to modify Keil and look for other information but the results are always the same.
Please help with information how we can program the board according to our own needs? What has yet downloaded so that the compilation process always fails? Are there any other free editors / programmers we can use?
An example of a failed compilation result is shown in Figure 1.
Programming with Arduino IDE
According to the instructions in the manual, Nu Brick can be programmed using Arduino IDE. We are having trouble choosing the appropriate "board" type. We have downloaded all the drivers available online, but no board has yet matching Nu Brick.
Is there a special driver that can be sent to us so we can program Nu Brick using Arduino IDE as mentioned in manuals?
Nandra
Electrical Engineering UII