N76Exx Programming Support
Posted: 29 May 2017, 10:45
We have a N76E003 board, and the provided "NuMicro ICP Programming Tool.exe" connects and programs ok, but now we want to plan for production.
This means we seek info on
* Command line programming ? **
* Program of the N76Ex part from a larger host MCU ?
Are there any links to the ICP protocol/ timing of RST, OCDDA and OCDCK, and are there examples of code that programs N76e series from another small MCU
I see others offer ICP standalone, so that information must be available somewhere ?
** addit: See other thread, we did find Nu-Link_Command_Tool_V2.01.6592 on a different place in Nuvoton website, but it fails to see N76E003
Addit 2: See other post on Nu-Link_Command_Tool_V2.02.6629, which seems to improve Command Line programming support.
This means we seek info on
* Command line programming ? **
* Program of the N76Ex part from a larger host MCU ?
Are there any links to the ICP protocol/ timing of RST, OCDDA and OCDCK, and are there examples of code that programs N76e series from another small MCU
I see others offer ICP standalone, so that information must be available somewhere ?
** addit: See other thread, we did find Nu-Link_Command_Tool_V2.01.6592 on a different place in Nuvoton website, but it fails to see N76E003
Addit 2: See other post on Nu-Link_Command_Tool_V2.02.6629, which seems to improve Command Line programming support.