Code: Select all
NUC970 IBR 20151008.1735
No Key
Bootttttt from NAND
NAND boot!
U-Boot 2016.11 (Apr 24 2020 - 12:08:54 +0530)
CPU: NUC972
Board: NUC972
DRAM: 64 MiB
NAND: 128 MiB
In: serial
Out: serial
Err: serial
Net: emac
Error: emac address not set.
=>
A: Please add following line in your env file.This line tells U-Boot how to load and execute Linux kernel.
Code: Select all
bootcmd=nboot 0x7fc0 0 0x200000;bootm 0x7fc0;