[N9H30] How to change Non-OS touch calibration data in SPI flash address?

[9chuckyoung]

Default touch calibration file is stored at SPI flash address 0x00180000 /* SPI flash 1.5MB address */

If your app code size greater than the size, you need to increase the size to 2MB or more to avoid over-write condition.

Modification spilib.h at \BSP\SampleCode\emWin_SimpleDemo\tslib\spilib.h or \BSP\SampleCode\emWin_GUIDemo\tslib\spilib.h