[NUC970/N9H30] Booting
Posted: 01 Apr 2020, 15:23
Q: i flashed default images to development board given i.e. u-boot-spl.bin, u-boot.bin(NAND), 970uimage, env.txt in BSP/Images folder. It enters into bootloader and stops as below.
A: It's because the env file doesn't contain the command to launch kernel. Please add it according to the storage media you use.
Code: Select all
NUC970 IBR 20151008.1735
No Key
Bootttttt from NAND
nand_boot
U-Boot 2013.04-rc2-g0baa639 (Nov 09 2016 - 11:24:33)
CPU: NUC972
DRAM: 64 MiB
NAND: 128 MiB
MMC: mmc: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Net: emac
U-Boot>