Booting NUC972 with TF(MicroSD) possible?
Posted: 10 Jul 2019, 01:58
Hi,
I gathered that the NUC972 supports booting from an eMMC chip. I'm wondering if it is possible to boot a NUC972 with a TF card using the same pin connection as the eMMC? since the TF and eMMC are so close to each other sharing similar pinout and protocol. And a TF gives more flexibility. Many thanks in advance.
David
I gathered that the NUC972 supports booting from an eMMC chip. I'm wondering if it is possible to boot a NUC972 with a TF card using the same pin connection as the eMMC? since the TF and eMMC are so close to each other sharing similar pinout and protocol. And a TF gives more flexibility. Many thanks in advance.
David