Once you open the ICP Programming Tool, you can click on the "Options" in the "Programming" section, as shown in Figure 1, to enable programming options.
Figure 1
In the programming options, check the "Write Software Serial Number" in the "Operation" section (shown in Figure 2) to open the Software Serial Number (SN) section (shown in Figure 3).
Figure 2
Figure 3
In the "Software Serial Number" section, the user can enter the starting value of the serial number and the on-chip Flash write address. The serial number is automatically incremented by 1 when the programming is successful, and the serial number is automatically incremented after the programming is completed (whether successful or not) by means of offline programming.
How to use the ICP Programming Tool to write a serial number?
-
- Information
-
Who is online
Users browsing this forum: No registered users and 8 guests