Search found 307 matches

by chhsieh3
05 Jul 2023, 10:46
Forum: Example Code
Topic: [MA35D1] OTA Update by Linux Stage
Replies: 0
Views: 7084

[MA35D1] OTA Update by Linux Stage

Application: The MA35D1 series sample code shows how to do OTA update in Linux stage. BSP Version: Linux-5.10.x Hardware: NuMaker-IoT-MA35D1 The purpose of this example code is to provide instructions for using the "swupdate" application to update the Linux Kernel, device tree, and root filesystem ...
by chhsieh3
30 Jun 2023, 10:01
Forum: Example Code
Topic: [NUC029] QMK Keyboard
Replies: 0
Views: 6737

[NUC029] QMK Keyboard

Application: This example code uses QMK firmware keyboard open source to implement a keyboard on NUC029. BSP Version: NUC029xGE_Series_BSP_CMSIS_V3.00.004 Hardware: NuMaker-NUC029SGE V1.0 QMK (Quantum Mechanical Keyboard) is an open source community centered around developing computer input devices...
by chhsieh3
30 Jun 2023, 09:56
Forum: Example Code
Topic: [M032] Using SPI Flash as USB MSC Device
Replies: 0
Views: 6506

[M032] Using SPI Flash as USB MSC Device

Application: This example code supports to program files to SPI Flash through mass storage interface. BSP Version: M032_Series_BSP_CMSIS_V3.05.000 Hardware: NuMaker-M032KI V1.0 This example code uses the M032 series microcontroller as a SPI Flash programmer to update SPI Flash through the USB inter...
by chhsieh3
06 Jun 2023, 16:34
Forum: Example Code
Topic: [M251] Using TIMER Capture to Get Frequency of a Signal
Replies: 0
Views: 6270

[M251] Using TIMER Capture to Get Frequency of a Signal

Application: This sample code uses M251 TIMER capture function to get frequency of an input signal. BSP Version: M251_M252_M254_M256_M258_Series_BSP_CMSIS_V3.02.001 Hardware: NuMaker-M251SD Ver1.1 This sample code uses TIMER2 to capture the input signal frequency and duty cycle through the capture ...
by chhsieh3
31 Mar 2023, 15:44
Forum: Example Code
Topic: [MA35D1] RTP Self-Test Library
Replies: 0
Views: 17753

[MA35D1] RTP Self-Test Library

Application: This example code is a self-test library for Real Time Processor (RTP) of MA35D1 series microprocessor. This library implements the self-test function of the chip to meet safety requirements required by the market. When errors occur in the chip, they can be detected in real-time and fu...
by chhsieh3
28 Mar 2023, 13:41
Forum: Example Code
Topic: [M460] Simple Code for CANFD Transmission
Replies: 0
Views: 13187

[M460] Simple Code for CANFD Transmission

Application: This example code uses M460 series MCU to transmit CANFD messages cyclically. BSP Version: M460_Series_BSP_CMSIS_V3.00.001 Hardware: NuMaker-M467HJ V1.0 This example code uses to test CANFD transmitting for M460 series MCU. You can download the sample code at https://www.nuvoton.com/re...
by chhsieh3
20 Feb 2023, 11:55
Forum: Example Code
Topic: [MS51] Adjusting PWM Duty Cycle Based on ADC Input Voltage
Replies: 0
Views: 13593

[MS51] Adjusting PWM Duty Cycle Based on ADC Input Voltage

Application: This example code uses MS51 PWM to output 10 kHz waveform with 0~100% duty cycle according to 0~3V ADC input voltage. BSP Version: MS51_Series_BSP_Keil_V1.00.004 Hardware: NuTiny-MS51DA V1.1 This example code uses MS51 PWM to output 10 kHz waveform with 0~100% duty cycle according to 0...
by chhsieh3
04 Jan 2023, 11:47
Forum: Example Code
Topic: [M032] Implementing USB Disk and FatFs function
Replies: 0
Views: 14290

[M032] Implementing USB Disk and FatFs function

Application: This example code uses the M032 series microcontroller (MCU) to implement USB Disk and FatFs function. BSP Version: M031 Series BSP CMSIS V3.05.000 Hardware: NuMaker-M032LD V1.1 This example code uses the M032 series microcontroller (MCU) to run USB mass storage functions and FatFs fil...
by chhsieh3
23 Dec 2022, 10:27
Forum: Example Code
Topic: [M480] CAN Bus-Off Recovery Mechanism
Replies: 0
Views: 6356

[M480] CAN Bus-Off Recovery Mechanism

Application: This example is an application code for CAN bus, which describes how to recover and let a device re-enter the bus for packet transmission and reception when a bus off occurs at the device node. BSP Version: M480 Series BSP CMSIS V3.05.003 Hardware: NuMaker-PFM-M487 V3.0 This example is...
by chhsieh3
20 Dec 2022, 16:15
Forum: Example Code
Topic: [M258] Completing COM/SEG LCD Project with NuTool-LCDView
Replies: 0
Views: 6232

[M258] Completing COM/SEG LCD Project with NuTool-LCDView

Application: This example code uses NuMaker-M258KG as an example to show how to complete a COM/SEG LCD project using NuTool-LCDView. BSP Version: M251_M252_M254_M256_M258_Series_BSP_CMSIS_V3.02.003 Hardware: NuMaker-M258KG V1.1 NuTool-LCDView is a powerful tool that can generate LCD configuration c...