Application: This sample code uses touch slider to control ARGB LED effect and uses SPI to simulate ARGB LED timing sequence on ML56 series. BSP Version: ML51 Series BSP V2.00.001 Hardware: ML56 Demo Board Ver1.0 This sample code uses touch slider to control ARGB to do LED dimming and uses SPI to s...

Application: This example code uses M480 HS-USBD to simulate a HID mouse with 8K report rate and support remote wake-up. BSP Version: M480 Series BSP CMSIS v3.03.000 Hardware: NuMaker-ETM-M487 v1.2, NuMaker-PFM-M487 v3.0 This example code uses HS-USBD to simulate a HID mouse and supports these feat...

Application: This sample code uses SPI to simulate ARGB LED timing sequence and realize breathing ARGB LED effect on MS51 series. BSP Version: MS51 Series BSP V1.00.003 Hardware: NuMaker-MS51PC Ver1.0 This sample code uses SPI to simulate ARGB LED timing sequence and do LED breathing effect. This c...

Application: This example code uses M032 to run ISR in SRAM. BSP Version: M031_Series_BSP_CMSIS_V3.03.000 Hardware: NuMaker-M032SE V1.3 This example code uses the M032 ISP function to map UART Handler to SRAM, so that UART function can work normally while FMC operates Flash memory. You can download...

Application: This example code uses M031 SPI to drive SI4463 to achieve wireless sending and receiving data. BSP Version: M031 BSP CMSIS V3.03.000 Hardware: NuMaker-M031SD V1.1 This example code uses M031 to drive SI4463 through SPI interface to achieve wireless (433M) sending and receiving data. Y...

Application: This example code uses AT command to communicate with the AS7221 module through the USCI_UART interface. BSP Version: M031 BSP CMSIS V3.03.000 Hardware: NuMaker-M031KI V1.0, AS7221 Module In this example code, the M031 can send AT command by the UART interface to communicate with the A...

Application: This example code is to add UART interface to the original DALI application project for communication with AS7221, so that DALI Command can control the AS7221 module. BSP Version: 102_207_209_NDA102_200707_Lib Hardware: DALI_SLAVE_NDA102EC1 V1.0 This example code can receive the instru...

Application: This example code uses M031 to achieve multi-application jump through the IAP way. BSP Version: M031 BSP CMSIS V3.03.000 Hardware: NuMaker-M031SD V1.1 This example code uses three M031 applications, through the IAP way, to change the interrupt Vector table address, reset the MCU system...

Application: An example code for the M031 series microcontroller (MCU) to control NAU7802 via I2C interface. This document introduces how to use the example code to configure NAU7802, start ADC conversion and read out data from NAU7802. BSP Version: M031 BSP CMSIS V3.03.000 Hardware: NuMaker-M031SE...

Application: This example code uses M263 I2C to drive TDK CH101 to achieve distance measurement function. BSP Version: M263_Series_BSP_CMSIS_V3.00.003 Hardware: NuMaker-M263KI V1.1 This example code uses the M263 I2C to drive CH101 module to achieve distance measurement function. The CH101 provides...