Search found 18 matches

by AlsoJoe
17 Nov 2017, 17:29
Forum: Nuvoton MCU Sample Code
Topic: NUC230 data flash programming
Replies: 1
Views: 1209

Re: NUC230 data flash programming

Hi Ahndy, About the FMC question, attached is a sample code base on the FMC_RW sample code in NUC230_240_Series_BSP_CMSIS_V3.01.001. FMC_RW_171017.zip Use SetDataFlashBase() to set the Data Flash base address. Inside SetDataFlashBase(), SYS->IPRSTC1 |= SYS_IPRSTC1_CHIP_RST_Msk; do chip reset to make...
by AlsoJoe
18 Apr 2017, 18:02
Forum: Nuvoton MCU Sample Code
Topic: Sample project/resources for GCC/Linux
Replies: 9
Views: 3263

Re: Sample project/resources for GCC

Hi lalit, may I ask the reason of using GCC?
As far as I know, it cannot Debug when using GCC instead of using Keil or IAR.
by AlsoJoe
17 Apr 2017, 15:32
Forum: Nu-bridge / ISP Software
Topic: Source Code for ISP loaders missing from Nuvoton_8051_ISP-ICP_Programmer_v7.15.zip
Replies: 3
Views: 1801

Re: Source Code for ISP loaders missing from Nuvoton_8051_ISP-ICP_Programmer_v7.15.zip

We do not release this standard ISP boot code source code, but for 1T series, we release ISP boot source code and GUI source code similar with Nuvoton M0 package to release. Switch the part number you want to create.
by AlsoJoe
17 Apr 2017, 15:15
Forum: Nuvoton MCU Sample Code
Topic: Where to find Sample Code on Nuvoton website?
Replies: 2
Views: 1301

Re: Where to find Sample Code on Nuvoton website?

Yes, if you do not need debug function, also can download this hex file into tiny board by nulink ICP tool to find the free run result.
by AlsoJoe
29 Mar 2017, 11:17
Forum: Nu-bridge / ISP Software
Topic: The latest Nu-Bridge Dual COM Release! (March 2017)
Replies: 0
Views: 1237

The latest Nu-Bridge Dual COM Release! (March 2017)

Click to download the latest Nu-Bridge Dual COM firmware, Windows driver, and User Manual:
Nu-Bridge Dual COM.zip
(5.08 MiB) Downloaded 259 times

Click to download the latest Nu-Bridge ISP Update source code:
Nu-Bridge ISP.zip
(247.29 KiB) Downloaded 163 times

Click to download the latest Nu-Bridge Schematic:
Nu-Bridge Schematic.zip
(230.89 KiB) Downloaded 152 times
by AlsoJoe
29 Mar 2017, 11:11
Forum: Nu-bridge / ISP Software
Topic: The Latest Nu-Bridge Release! (March 2017)
Replies: 0
Views: 1230

The Latest Nu-Bridge Release! (March 2017)

Click to download the latest Nu-Bridge firmware, software and User Manual:
Nu-Bridge Serial Port.zip
(20.51 MiB) Downloaded 190 times

Click to download the latest Nu-Bridge ISP Update source code:
Nu-Bridge ISP.zip
(247.29 KiB) Downloaded 144 times

Click to download the latest Nu-Bridge Schematic:
Nu-Bridge Schematic.zip
(230.89 KiB) Downloaded 140 times
by AlsoJoe
29 Mar 2017, 10:53
Forum: Nu-bridge / ISP Software
Topic: The Latest ISP Programming Tool Release! (March 2017)
Replies: 0
Views: 1221

The Latest ISP Programming Tool Release! (March 2017)

Click to download the lastest ISP Programming Tool!
by AlsoJoe
29 Mar 2017, 10:47
Forum: Nu-bridge / ISP Software
Topic: If the watchdog (WDT) function is enabled in the config bit, will it affect ISP upgrade procedure?
Replies: 0
Views: 1275

If the watchdog (WDT) function is enabled in the config bit, will it affect ISP upgrade procedure?

If the watchdog (WDT) function is enabled in the config bit, the watchdog will start automatically. The default clock source is internal low speed 10 kHz clock. Reset Time = Overflow Time + Delay Time = (2 ^ 18 + 1026) /10k=26.3 seconds. The Nuvoton ISP Boot Loader program did not include the watchd...
by AlsoJoe
29 Mar 2017, 10:46
Forum: Nu-bridge / ISP Software
Topic: Why does the "Invalid Chip ID" error message appear and Part No. show Unknown when using ISP Programming Tool?
Replies: 0
Views: 1469

Why does the "Invalid Chip ID" error message appear and Part No. show Unknown when using ISP Programming Tool?

In the installation folder for the ISP Programming Tool, “config.ini” records PDID (Part Device Identification Number) of all the NuMicro series. After connection, the ISP Programming Tool will compare the PDID of target chip with the “config.ini”. If the “config.ini” gets lost or the PDID of target...